01242 524228
FONDISOL PE
FONDISOL PE
READY TO USE THIN BASECOAT RENDER FOR EWI & RENDER BOARD SYSTEMS
- Ready to use basecoat
- For use on sound substrates
- Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub
Storage: 12 months
Ready to use
Product Datasheet
Where to Buy
Hand Application
Durable
Breathable
Insulation
Usage Calculator
Enter the area required in square meters.
Description
PRB FONDISOL PE is a ready to use base coat for use on external wall insulation systems and in particular the PRB THERMOPATE system and PRB approved render boards that have been correctly applied to a suitable substrate.
PRB FONDISOL PE can be used as a thin reinforced basecoat using the PRB AVN MESH and has very good resistance to impact on EWI system, when embedded with double mesh (withstands 70 joules) for CAT 1 EWI systems.
The base coat when dry can be coated with the primer PRB CRÉPIFOND F or G then covered using a thin coat finish PRB CRÉPOXANE, PRB CRÉPISIX M or PRB RÉVOMUR M,
The colour of this ready to use product is off white and must only be hand applied.
For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.
Other PRB Products
RENDER BEAD ADHESIVE
WATER BASED FLEXIBLE BONDING ADHESIVE
- High initial grab, designed for use with the PRB mineral renders
- Excellent bonding strength, solvent free and virtually odourless
- Can be applied to damp surfaces
290ml Tube
Storage: 12 months in unopened packaging in a cool and dry storage place
Ready to use
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
RÉVOMUR M
READY TO USE ECO DESIGNED FIREPROOFED TEXTURED THIN COATING WITH EXCELLENT W3 CLASSIFICATION HYDROPHOBIC CAPABILITY AVAILABLE IN A RANGE OF COLOURS
- Eco-Friendly ready to use top coat decorative textured finish manufactured with 35% recycled materials
- Wide colour range with UK tinting available
- Machine and hand applied
25Kg Tub
Storage: 12 months
Ready to use
FONDIMUR
EASY APPLICATION THIN COAT FIBRED BASECOAT AND ADHESIVE MORTAR
- Fibre reinforced basecoat suitable for render board substrates, EPS EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Levelling and bonding of insulation boards on to the substrate
25Kg Bag
Storage: 12 months
100R
LIGHTWEIGHT AIRTIGHT SEALING RENDER
- Provides perfect airtightness
- Lime-based render
- Easy to apply
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
CRÉPISIX M
READY TO USE SILOXANE ENHANCED THIN COAT RENDER IN A 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Thin, fireproofed coating with siloxane additive
- Matt water repellent effect
- Facade protection and decoration
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
CRÉPOXANE F or M
READY TO USE SILOXANE RESIN THIN COAT RENDER IN A 1mm AND 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Organic fireproofed structured render with siloxane resin
- Matt water repellent effect
- Excellent water repellency capability and good permeability to water vapour
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
IMPERFOND
THICK WATERPROOFING MORTAR FOR BELOW GROUND WALLS, PONDS, SWIMMING POOLS, BASEMENTS, etc
- Waterproofing of walls and floors
- Thickness from 8 to 20 mm
- Suitable for swimming pools and ponds. Can withstand aggressive waters in industrial and agricultural environments
25Kg Bag
Storage: 12 Months
SC 150
LIME RICH RENOVATION BASECOAT RENDER
- Suitable for dealing with old masonry containing saltpetre and/or damp
- Coverable, it can also remain uncoated
- Designed to treat interior and exterior walls
25Kg Bag
Storage: 18 months
ACCROFIX POWDER
ENHANCED PREPARATORY KEY / BASECOAT BONDING MORTAR
- Polymer modified key coat render for dealing with differing substrates. Rich in binders, it provides excellent adhesion between the substrate and the render and particularly suitable for pre-treatment for severe exposure locations and wet substrates
- Applied as a preparatory key coat prior to applying a render
- Suitable for a range of masonry substrates
25Kg Bag
Storage: 12 Months
SOUS-ENDUIT R&D
Semi-lightweight, Fine Grained, Eco-Designed Single-Layer Undercoat
- Carbon footprint reduced by 52%
- Guaranteed cement-free
- Waterproof coating for exterior and interior walls
25 Bag
Storage: 18 Months
PRIMCHAUX PE
LIME PRIMER SUCTION CONTROL AND BONDING AGENT SPECIFICALLY DESIGNED FOR LIME RENDER SYSTEMS
- Ready to use coating providing suction control and a sound adhesive layer for lime renders
- Controls suction on high absorption, low porosity substrates
- Provides good adhesion between the substrate and the finishing render
12Kg Tub
Storage: 24 Months
Ready to use
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
CLASSIC TAL
SEMI-DENSE FINE GRAIN SINGLE COAT / BASECOAT RENDER
- Weatherproof and breathable smooth, fine finish, weatherproofing render
- Suitable for dense aggregate concrete blockwork & hard strong brickwork
- Compatible with organic coverings (paint and thick paint coverings), hydraulic and mineral decorative renders
25Kg Bag
Storage: 18 months.
Fire Resistant (see datasheet)
ACCROFIX PÂTE
READY TO USE SUCTION CONTROL AND BONDING AGENT
- READY TO USE COLOURED TEXTURED COATING PROVIDING A SOUND ADHESIVE LAYER FOR DECORATIVE RENDERS
- Controls suction on high absorption, low porosity substrates
- Provides adhesion between the substrate and the finishing render
20Kg Tub
Storage: 24 months
Ready to use
THERMOLOOK GF-GM
LIGHTWEIGHT MINERAL TOPCOAT RENDER FOR USE ON EXTERNAL WALL INSULATION AND RENDER BOARD SYSTEMS
- Mineral topcoat render for PRB EWI systems: Thermolook GF/GM EPS, Thermoroche (Mineral Wool) and Thermobois (Wood Fibre)
- Finishes - Fine scraped (GF) Medium Scraped (GM), Roughcast and Spray Textured
- Finished appearance is similar to Monocouche
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
EPS 70E
GRAPHITE ENHANCED EPS 70E FOR USE WITH THE PRB EWI SYSTEMS
- Specifically designed for the PRB EWI Systems
- Lambda as low as 0.30 W/mK
- Manufactured to EN-13163-2012+A2-2016
BBA Approved
RÉNOMUR TOP
SPECIALIST RENOVATION BASECOAT RENDER FOR PAINTED OR THIN COATED SUBSTRATES
- Ideal for sound, well adhered painted surfaces without the need for stripping and unpainted masonry and render surfaces
- Can receive a wide range of mineral and organic finishes
- Avoids the use of harmful and polluting solvents and saves time
25Kg Bag
Storage: 12 month
RENOMUR PATE
READY TO USE RENOVATION BASECOAT IDEALLY SUITED FOR PAINTED SUBSTRATES
- Specified for use on external wall insulation systems and render boards
- For use on paint/thick paint coating refurbishment without stripping
- Avoids the use of harmful and polluting solvents
20 Tub
Storage: 18 months
Ready to use
FONDISOL PE
READY TO USE THIN BASECOAT RENDER FOR EWI & RENDER BOARD SYSTEMS
- Ready to use basecoat
- For use on sound substrates
- Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub
Storage: 12 months
Ready to use
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorAccreditations
