01242 524228
AVR MESH
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
Product Datasheet
Where to Buy
Description
PRB AVR MESH is used as a reinforcing mesh for areas exposed to impact in thermal insulation systems for the PRB External Wall Insulation systems. It is to be installed before the standard PRB AVN MESH in the PRB FONDISOL F or PRB FONDIMUR base coats.
It has a high quality synthetic coating on the glass yarn that protects the mesh against alkaline influences from the renders and base coat materials used.
The mesh must be fully embedded into the basecoat.
The PRB AVR MESH is positioned with the mesh joints butted together (Do not overlap the joints as this will cause surface discrepancies).
The PRB AVR MESH must be installed tight, straight, and free of wrinkles, ripples, or waves.
For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.
Other PRB Products
RENDER TAPES
A RANGE OF LOW TACK, BRICK AND RENDER AND ROUGH SURFACE PROTECTIVE TAPES
- Low tack tape - Suitable for applications onto smooth surfaces, e.g. window and door frames, metalwork, paint or smooth masonry finishes e.g plaster.
- Brick and render tape - Suitable for applications onto rough surfaces, brick, concrete blocks etc.
- Rough surface tape - Suitable for applications onto rough surfaces, brick, existing render, concrete block, etc.
RENDER BEAD ADHESIVE
WATER BASED FLEXIBLE BONDING ADHESIVE
- High initial grab, designed for use with the PRB mineral renders
- Excellent bonding strength, solvent free and virtually odourless
- Can be applied to damp surfaces
290ml Tube
Storage: 12 months in unopened packaging in a cool and dry storage place
Ready to use
ACCÉLÉRATEUR FLASH
LIQUID ADDITIVE TO ACCELERATE THE SETTING OF POWDERED RENDERS, MORTARS AND CONCRETES
- Used to speed up the initial setting time of cement mortars
- Reduces the time before single-coat renders are scratched
- Improves site working times
20L Tub
Storage: 48 months, Store upright
Ready to use
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
MINÉRALISANT FAÇADE
READY TO USE MINERALISER FOR WATERPROOFING, STABILISING AND PROTECTING SURFACES
- Mineralises materials through micro-crystallisation
- Preserves the original appearance of the materials, solvent free and lets the materials breathe
- Water repellent - suitable for all mineral based substrates
20L Tub
Ready to use
RÉVOMUR M
READY TO USE ECO DESIGNED FIREPROOFED TEXTURED THIN COATING WITH EXCELLENT W3 CLASSIFICATION HYDROPHOBIC CAPABILITY AVAILABLE IN A RANGE OF COLOURS
- Eco-Friendly ready to use top coat decorative textured finish manufactured with 35% recycled materials
- Wide colour range with UK tinting available
- Machine and hand applied
25Kg Tub
Storage: 12 months
Ready to use
FONDIMUR
EASY APPLICATION THIN COAT FIBRED BASECOAT AND ADHESIVE MORTAR
- Fibre reinforced basecoat suitable for render board substrates, EPS EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Levelling and bonding of insulation boards on to the substrate
25Kg Bag
Storage: 12 months
CRÉPISIX M
READY TO USE SILOXANE ENHANCED THIN COAT RENDER IN A 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Thin, fireproofed coating with siloxane additive
- Matt water repellent effect
- Facade protection and decoration
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
CRÉPOXANE F or M
READY TO USE SILOXANE RESIN THIN COAT RENDER IN A 1mm AND 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Organic fireproofed structured render with siloxane resin
- Matt water repellent effect
- Excellent water repellency capability and good permeability to water vapour
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
ORANGE MESH
REINFORCING MESH FOR USE WITH MONOCOUCHE RENDERS AND MASONRY BASE COAT RENDERS
- Coated glass fibre mesh
- Specially designed for monocouche renders
- Compatible with PRB floor levellers
0 Tube
Storage: Store upright
Ready to use
AVE MESH
MESH FOR PRB RENDERS AND THERMOLOOK GF/GM LIGHTWEIGHT TOPCOAT RENDER
- Coated glass reinforcement mesh
- For use on external facades
- Fabric Mesh
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
ACCROSOL AG
ALL PURPOSE ADHESIVE PROMER
- Multi-substrates
- Clean and quick to apply
- Increases adherence
15Kg Tub
Storage: 18 months
Ready to use
ACTI FLASH
FAST ACTION ALGAE, MOULD AND SURFACE TREATMENT
- Ideal for cleaning mould and algae contaminated facades
- Fast action on contaminated substrates
- Returns your facade to it's initial appearance
20L Tub
Storage: 12 months
Ready to use
HYDROFUGE
WATER REPELLENT, HYDROPHOBIC SURFACE TREATMENT
- Non film forming and silicone free water repellent coating
- Enhances weatherproof capability
- Does not alter the appearance of your facade
20L Container
Storage: 12 months
Ready to use
LATEX FAÇADE
ADMIXTURE FOR BONDING AND ENHANCING MORTARS, RENDERS AND MICRO CONCRETES
- Used to obtain high performance mortars
- Improves the workability and adhesion of all mortars
- Improves weatherproofing and reduces the risk of cracking
20L Tub
Storage: 12 months
Ready to use
ACCROFIX PÂTE
READY TO USE SUCTION CONTROL AND BONDING AGENT
- READY TO USE COLOURED TEXTURED COATING PROVIDING A SOUND ADHESIVE LAYER FOR DECORATIVE RENDERS
- Controls suction on high absorption, low porosity substrates
- Provides adhesion between the substrate and the finishing render
20Kg Tub
Storage: 24 months
Ready to use
THERMOLOOK GF-GM
LIGHTWEIGHT MINERAL TOPCOAT RENDER FOR USE ON EXTERNAL WALL INSULATION AND RENDER BOARD SYSTEMS
- Mineral topcoat render for PRB EWI systems: Thermolook GF/GM EPS, Thermoroche (Mineral Wool) and Thermobois (Wood Fibre)
- Finishes - Fine scraped (GF) Medium Scraped (GM), Roughcast and Spray Textured
- Finished appearance is similar to Monocouche
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
EPS 70E
GRAPHITE ENHANCED EPS 70E FOR USE WITH THE PRB EWI SYSTEMS
- Specifically designed for the PRB EWI Systems
- Lambda as low as 0.30 W/mK
- Manufactured to EN-13163-2012+A2-2016
BBA Approved
FONDISOL PE
READY TO USE THIN BASECOAT RENDER FOR EWI & RENDER BOARD SYSTEMS
- Ready to use basecoat
- For use on sound substrates
- Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub
Storage: 12 months
Ready to use
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorAccreditations
