01242 524228
ACCÉLÉRATEUR FLASH
ACCÉLÉRATEUR FLASH
LIQUID ADDITIVE TO ACCELERATE THE SETTING OF POWDERED RENDERS, MORTARS AND CONCRETES
- Used to speed up the initial setting time of cement mortars
- Reduces the time before single-coat renders are scratched
- Improves site working times
20L Tub
Storage: 48 months, Store upright
Ready to use
Product Datasheet
Where to Buy
Description
PRB ACCÉLÉRATEUR FLASH is a liquid setting and hardening accelerator for cementitious renders e.g. PRB SUPERBRUT, PRB OZE, PRB ALG, ALG SUPER BLANC and concretes.
The additive is less effective once the temperature exceeds 10°C.
Comply with recommended doses and take note of the Observations in the Precautions For Use.
IMPORTANT INFORMATION TO TAKE NOTE OF:
The PRB ACCÉLÉRATEUR FLASH is mixed with thAll Productse water first. It is essential to mix the water fully to ensure even dispersion of the additive, using a paddle mixer at a maximum speed of 300 rpm. Ensure the product is fully mixed before using.
The accelerator dosage must be constant throughout the application in order to obtain a regular and consistent colour.
Use at high doses can cause risks of efflorescences and increases shrinkage.
The use of accelerators tends to darken colours.
For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.
Other PRB Products
RENDER TAPES
A RANGE OF LOW TACK, BRICK AND RENDER AND ROUGH SURFACE PROTECTIVE TAPES
- Low tack tape - Suitable for applications onto smooth surfaces, e.g. window and door frames, metalwork, paint or smooth masonry finishes e.g plaster.
- Brick and render tape - Suitable for applications onto rough surfaces, brick, concrete blocks etc.
- Rough surface tape - Suitable for applications onto rough surfaces, brick, existing render, concrete block, etc.
RENDER BEAD ADHESIVE
WATER BASED FLEXIBLE BONDING ADHESIVE
- High initial grab, designed for use with the PRB mineral renders
- Excellent bonding strength, solvent free and virtually odourless
- Can be applied to damp surfaces
290ml Tube
Storage: 12 months in unopened packaging in a cool and dry storage place
Ready to use
ACCÉLÉRATEUR FLASH
LIQUID ADDITIVE TO ACCELERATE THE SETTING OF POWDERED RENDERS, MORTARS AND CONCRETES
- Used to speed up the initial setting time of cement mortars
- Reduces the time before single-coat renders are scratched
- Improves site working times
20L Tub
Storage: 48 months, Store upright
Ready to use
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
MINÉRALISANT FAÇADE
READY TO USE MINERALISER FOR WATERPROOFING, STABILISING AND PROTECTING SURFACES
- Mineralises materials through micro-crystallisation
- Preserves the original appearance of the materials, solvent free and lets the materials breathe
- Water repellent - suitable for all mineral based substrates
20L Tub
Ready to use
TRADI LISSE
EXTRA FINE MONOCOCUHE RENDER IDEALLY SUITED FOR FLOAT & SPONGE FINISHES
- Weatherproof, breathable and decorative through colour render. Suitable for ultra lightweight, lightweight & dense aggregate concrete blocks & normal density aircrete (≥ 550 kg/m³).
- Available only in Blanc de la Cote
- Can also achieve other finishes e.g. fine scraped, roughcast, rustic and spray textured
25Kg Bag
Storage: 18 Months
Fire Resistant (see datasheet)
MONOCOUCHE SEMI ALLÉGÉ R&D
Semi-Lightweight, Fine Grained, Eco-Designed Single-Layer Plaster
- Carbon footprint reduced by 48%
- Guaranteed cement-free
- All types of finishes achievable
25 Bag
Storage: 18 Months
FINICHAUX
Lightweight Lime Rich Fine Or Medium Grain Single Coat Render
- Micro - fibred, weatherproof, breathable and decorative through colour, one coat, lime rich render for external & internal masonry walls
- Ideally suited for fine scraped and floated render finishes. Other finishes can be achieved: sponged, roughcast
- Suitable for spray or hand application
25 Bag
Storage: 18 Months
Fire Resistant (see datasheet)
ORANGE MESH
REINFORCING MESH FOR USE WITH MONOCOUCHE RENDERS AND MASONRY BASE COAT RENDERS
- Coated glass fibre mesh
- Specially designed for monocouche renders
- Compatible with PRB floor levellers
0 Tube
Storage: Store upright
Ready to use
AVE MESH
MESH FOR PRB RENDERS AND THERMOLOOK GF/GM LIGHTWEIGHT TOPCOAT RENDER
- Coated glass reinforcement mesh
- For use on external facades
- Fabric Mesh
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
ACCROSOL AG
ALL PURPOSE ADHESIVE PROMER
- Multi-substrates
- Clean and quick to apply
- Increases adherence
15Kg Tub
Storage: 18 months
Ready to use
ACTI FLASH
FAST ACTION ALGAE, MOULD AND SURFACE TREATMENT
- Ideal for cleaning mould and algae contaminated facades
- Fast action on contaminated substrates
- Returns your facade to it's initial appearance
20L Tub
Storage: 12 months
Ready to use
HYDROFUGE
WATER REPELLENT, HYDROPHOBIC SURFACE TREATMENT
- Non film forming and silicone free water repellent coating
- Enhances weatherproof capability
- Does not alter the appearance of your facade
20L Container
Storage: 12 months
Ready to use
LATEX FAÇADE
ADMIXTURE FOR BONDING AND ENHANCING MORTARS, RENDERS AND MICRO CONCRETES
- Used to obtain high performance mortars
- Improves the workability and adhesion of all mortars
- Improves weatherproofing and reduces the risk of cracking
20L Tub
Storage: 12 months
Ready to use
ACCROFIX PÂTE
READY TO USE SUCTION CONTROL AND BONDING AGENT
- READY TO USE COLOURED TEXTURED COATING PROVIDING A SOUND ADHESIVE LAYER FOR DECORATIVE RENDERS
- Controls suction on high absorption, low porosity substrates
- Provides adhesion between the substrate and the finishing render
20Kg Tub
Storage: 24 months
Ready to use
SR ADDITIF
LIQUID DRYING ACCELERATOR FOR PRE-MIXED THIN COAT RENDERS AND PAINTS
- Speeds up setting times of thin coat acrylic and siloxane finishes by forming an early surface film
- Ideal in wet, damp and cold weather
- Ready to use
ALG GF SUPER BLANC
BRIGHT WHITE LIGHTWEIGHT MONOCOUCHE RENDER
- Weatherproof, breathable and decorative through colour render for external and internal masonry walls
- Suitable for all types of finish (fine scraped, floated, roughcast, rustic and spray textured)
- Its specific formulation makes it especially suitable for low strength masonry
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
ALG GRAIN FIN
LIGHTWEIGHT FINE GRAIN SINGLE COAT RENDER AVAILABLE IN A RANGE OF COLOURS
- Weatherproof, breathable and decorative render for external and internal masonry walls
- Suitable for all types of finishes
- Its specific formulation makes it especially suitable for low strength masonry
25 Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
OZÉ
BRIGHT WHITE SEMI-LIGHTWEIGHT MONOCOUCHE RENDER
- Fine grained single-coat
- Curing time adapted to winter conditions
- Weatherproof, breathable and decorative render for external and internal masonry
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorAccreditations
