01242 524228
Product Categories
Our Product Range
Download our 2026 Latest Product BrochureBase Coats
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
PRIMCHAUX PE
Lime Primer Suction Control and Bonding Agent Specifically Designed For Lime Render Systems
- Ready to use coating providing suction control and a sound adhesive layer for lime renders
- Controls suction on high absorption, low porosity substrates
- Provides good adhesion between the substrate and the finishing render
12Kg Tub
Storage: 24 Months
Ready to use
SOUS-ENDUIT R&D
Semi-lightweight, Fine Grained, Eco-Designed Single-Layer Undercoat
- Carbon footprint reduced by 52%
- Guaranteed cement-free
- Waterproof coating for exterior and interior walls
25 Bag
Storage: 18 Months
ACCROFIX POWDER
Enhanced Preparatory Key Coat Bonding Mortar
- Polymer modified key coat render for dealing with differing substrates. Rich in binders, it provides excellent adhesion between the substrate and the render and particularly suitable for pre-treatment for severe exposure locations and wet substrates
- Applied as a preparatory key coat prior to applying a render
- Suitable for a range of masonry substrates
25Kg Bag
Storage: 12 Months
SC 150
Lime Rich Renovation Basecoat Render
- Suitable for dealing with old masonry containing saltpetre and/or damp
- Coverable, it can also remain uncoated
- Designed to treat interior and exterior walls
25Kg Bag
Storage: 18 months
100R
Lightweight Airtight Sealing Render
- Provides perfect airtightness
- Lime-based render
- Easy to apply
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
TRADI GP
Air-Slaked Lime Render
- Dubbing out base coat
- Workability and flexibility of traditional air-slaked lime renders
- Allows the substrate to breathe
25 Bag
Storage: 18 months
IMPERFOND
Thick Waterproofing Mortar for Below Ground Walls and Swimming Pools
- Waterproofing of walls and floors
- Thickness from 8 to 20 mm
- Suitable for swimming pools and ponds. Can withstand aggressive waters in industrial and agricultural environments
25Kg Bag
Storage: 12 Months
SE ALLEGE
Fibred Lightweight Basecoat Render
- Breathable and weatherproofing render for external and internal walls
- High coverage per bag due to its lightweight composition.
- Suitable for levelling very uneven walls
25 Bag
Storage: 18 months
Fire Resistant (see datasheet)
FONDIMUR
Easy Application Thin Coat Fibred Base Coat & Adhesive Mortar
- Fibre reinforced basecoat suitable for render board substrates, EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Levelling and bonding of insulation boards on to the substrate
25Kg Bag
Storage: 12 months
SC GRIS
Semi-Lightweight Basecoat Render
- Fine grained single coat weatherproof render
- Allows substrates that are heavily coated in air-slaked lime breathe
- Compatible with organic coverings (paint and thick paint coverings), hydraulic and mineral decorative renders
25 Bag
Storage: 18 months
Fire Resistant (see datasheet)
RENDER BEAD ADHESIVE
WATER BASED FLEXIBLE BONDING ADHESIVE
- High initial grab, designed for use with the PRB mineral renders
- Excellent bonding strength, solvent free and virtually odourless
- Can be applied to damp surfaces
290ml Tube
Storage: 12 months in unopened packaging in a cool and dry storage place
Ready to use
BELLE EPOQUE SOUS ENDUIT
Heritage Lime Base Coat
- Traditional lime basecoat render
- Ideal for older historic or listed lime mortar buildings
- First application(s) of a traditional render system in two or three layers
25 Bag
Storage: 18 months
Fire Resistant (see datasheet)
FONDISOL F
Thin Base Coat Render and Bonding Mortar
- Fibre reinforced basecoat suitable for render board systems, EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Available in colours White or Grey
25Kg Bag
Storage: 12 months
Fire Resistant (see datasheet)
BBA Approved
FONDISOL PE
Ready To Use Thin Base Coat For EWI & Render Board Systems
- Ready to use basecoat
- For use on sound substrates
- Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub
Storage: 12 months
Ready to use
RENOMUR PATE
Ready To Use Renovation Base Coat
- Specified for use on external wall insulation systems and render boards
- For use on paint/thick paint coating refurbishment without stripping
- Avoids the use of harmful and polluting solvents
20 Tub
Storage: 18 months
Ready to use
RENOMUR TOP
Specialist Renovation Base Coat Render For Painted Substrates
- Ideal for sound, well adhered painted surfaces without the need for stripping and unpainted masonry and render surfaces
- Can receive a wide range of mineral and organic finishes
- Avoids the use of harmful and polluting solvents and saves time
25 Bag
Storage: 12 month
ACCROFIX PÂTE
Suction Control and Bonding Agent
- Ready to use coloured textured coating providing a sound adhesive layer for decorative renders
- Controls suction on high absorption, low porosity substrates
- Provides adhesion between the substrate and the finishing render
20Kg Tub
Storage: 24 months
Ready to use
CLASSIC TAL
Semi-Dense Fine Grain Single Coat / Base Coat Render
- Weatherproof and breathable smooth, fine finish, weatherproofing render
- Suitable for dense aggregate concrete blockwork & hard strong brickwork
- Compatible with organic coverings (paint and thick paint coverings), hydraulic and mineral decorative renders
25Kg Bag
Storage: 18 months.
Fire Resistant (see datasheet)
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorWhat our customers say
My company Spraytec rendering have been using PRB systems for a number of years. We find it to be our render system of choice and would say my company would be a good judge as we use approximately 3000 meters per month of their material. We predominantly buy from either...
Dan Stevens, Spraytec – Chesterfield
"Used some of the renders and it’s just as good as the rest if not better"
Phil Eyre
Just like to say thank you for the endless support over the last 4 years since using PRB systems. The materials are easy to work with and can achieve a great finish. For me! customer service is just as important, at PRB systems its second none! Quick specifications and guarantees...
Joey Tersus plastering Ltd
"Used the top coat today, really impressed. Went through the machine well, ruled and spat great and picked up and finished within 5 hours! Will be using again on as many jobs as I can!"
James Vaughan, JV Plastering
"Really nice material, sprayed absolutely spot on, no slumping and goes through the machine lovely."
Mark Jones, Mark Jones Plastering
We find PRB bang on and to be honest with you when I ring PRB if you don't answer you get back on me in 5 minutes and you advise me where best to source the materials, We find PRB is the easiest render that we’ve ever used. The Superbrut...
Karl Harden, Pro Rend – Wrexham
Using the renders didn’t take much to get used to, they are very similar if not better to apply than what we’ve been using before. Some issues we’ve had with previous manufacturers products we haven’t come across with PRB. Overall we’re very happy with what we’ve used and look forward...
Ryan O’Sullivan – O’Sullivan Plasterers Ltd
Just a quick note to thank you once again for the 48hr (working time) turnaround for the new site in Tavistock. I know this was a big ask but like the three times before, you’ve done it again. If it wasn’t for PRB, we wouldn’t have the likes of Rob...
Ernie Stobbs – SIG Distribution
The availability of getting all materials from PRB systems is pretty easy as there are many stockists within the UK nationwide . If an unusual colour is needed it’s easy enough to get it ordered in and delivered in to site when it arrives. The technical support with PRB Systems...
Mike Shepley, Shepley Plastering – Buxton
I just wanted to thank PRB Systems for their outstanding levels of service. I have been using PRB products for 4 years now and with the help of Steve Keitley and Ryan Hill in Technical support, I have been able to offer a service like no other rendering business in...
Chris – GRS
The approachability and knowledge from the representatives at PRB Systems has been a big help to us recently allowing us to take on more jobs requiring different specifications. This is complimented by the wide spread availability of materials and ease of application particularly Superbrut, helping to leave a high standard...
Cameron Vincent – C&L Rendering
Ryan Hill has really added value to our supply chain by his commitment to provide the best possible service to our branches so that our customers get deliveries in time and in full. He is always on hand to offer technical advice & product training so that we can pass...
Jonny Nelson – SIG Distribution
"I used the prb system today. It's was a really nice product to use . I hand applied it . And was easy to use . easy to work. And most of all my walls looked great after . customer was super happy. with the result. I definitely will use...
Leigh Griffiths
Been using PRB products for a number of years now, the quality and ease of application of their renders and related base coats is fantastic, when specifications are needed never an issue and no waiting, availability of materials spot on.
Steve Finnigan – Vale Facade Systems Limited
Accreditations
