SC 150

SC 150

LIME RICH RENOVATION BASECOAT RENDER

  • Suitable for dealing with old masonry containing saltpetre and/or damp
  • Coverable, it can also remain uncoated
  • Designed to treat interior and exterior walls
25Kg Bag Storage: 18 months

Spray Application

Weatherproof

Single Coat

Description

PRB SC 150 is a renovation base coat render for damp substrates and/or walls suffering from saltpetre. Designed to treat outdoor or indoor walls on all types of construction e.g. existing stone or brick masonry with low strength pointing e.g. lime mortar, cement-lime mortar, in order to reduce the effects of rising damp and migrating salts.

Suitable for use in basements, cellars, foundations, retaining walls, garages, plant rooms, above ground application for historic lime mortar constructed buildings etc.

Available in colour grey only.

The PRB SC 150 can be covered with the PRB BELLE ÉPOQUE SOUS ENDUIT lime base coat and the PRB BELLE ÉPOQUE FINITION lime top coat or the PRB FINICHAUX single-coat  lime rich renovation render or when applicable the decorative renders: PRB ALG or PRB SUPERBRUT etc

The PRB SC150 can also be float or sponge finished to receive a two pass decorative acrylic or mineral paint finish or a decorative thin coat acrylic render e.g. PRB CRÉPISIX M, PRB CRÉPOXANE F or M, PRB REVOMUR or when applying the system over a lime construction use the thin coat mineral render systems e.g. PRB CRÉPIXATE M.

For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.

Other PRB Products


RENDER BEAD ADHESIVE

WATER BASED FLEXIBLE BONDING ADHESIVE

  • High initial grab, designed for use with the PRB mineral renders
  • Excellent bonding strength, solvent free and virtually odourless
  • Can be applied to damp surfaces
290ml Tube Storage: 12 months in unopened packaging in a cool and dry storage place Ready to use
View Product

BADIRÉNO PE

WATER BASED AIR-SLAKED LIME WHITEWASH AVAILABLE IN A WIDE RANGE OF COLOURS

  • Protects and decorates exterior walls, with a deep matt effect to create a classic or rustic finish
  • Lets the walls breathe
  • Can be applied with a soft bristle brush, liming brush, spalter brush or natural sponge
12Kg Tub Ready to use
View Product

MINÉRALISANT FAÇADE

READY TO USE MINERALISER FOR WATERPROOFING, STABILISING AND PROTECTING SURFACES

  • Mineralises materials through micro-crystallisation
  • Preserves the original appearance of the materials, solvent free and lets the materials breathe
  • Water repellent - suitable for all mineral based substrates
20L Tub Ready to use
View Product

FONDIMUR

EASY APPLICATION THIN COAT FIBRED BASECOAT AND ADHESIVE MORTAR

  • Fibre reinforced basecoat suitable for render board substrates, EPS EWI systems and ICF constructions
  • Easy to use both manually or with a spray render machine
  • Levelling and bonding of insulation boards on to the substrate
25Kg Bag Storage: 12 months
View Product

100R

LIGHTWEIGHT AIRTIGHT SEALING RENDER

  • Provides perfect airtightness
  • Lime-based render
  • Easy to apply
25Kg Bag Storage: 18 months

Fire Resistant (see datasheet)

View Product

IMPERFOND

THICK WATERPROOFING MORTAR FOR BELOW GROUND WALLS, PONDS, SWIMMING POOLS, BASEMENTS, etc

  • Waterproofing of walls and floors
  • Thickness from 8 to 20 mm
  • Suitable for swimming pools and ponds. Can withstand aggressive waters in industrial and agricultural environments
25Kg Bag Storage: 12 Months
View Product

SC 150

LIME RICH RENOVATION BASECOAT RENDER

  • Suitable for dealing with old masonry containing saltpetre and/or damp
  • Coverable, it can also remain uncoated
  • Designed to treat interior and exterior walls
25Kg Bag Storage: 18 months
View Product

ACCROFIX POWDER

ENHANCED PREPARATORY KEY / BASECOAT BONDING MORTAR

  • Polymer modified key coat render for dealing with differing substrates. Rich in binders, it provides excellent adhesion between the substrate and the render and particularly suitable for pre-treatment for severe exposure locations and wet substrates
  • Applied as a preparatory key coat prior to applying a render
  • Suitable for a range of masonry substrates
25Kg Bag Storage: 12 Months
View Product
PRB SOUS-ENDUIT R&D
SOUS-ENDUIT R&D

Semi-lightweight, Fine Grained, Eco-Designed Single-Layer Undercoat

  • Carbon footprint reduced by 52%
  • Guaranteed cement-free
  • Waterproof coating for exterior and interior walls
25 Bag Storage: 18 Months
View Product
PRB PRIMCHAUX PE 12KG
PRIMCHAUX PE

LIME PRIMER SUCTION CONTROL AND BONDING AGENT SPECIFICALLY DESIGNED FOR LIME RENDER SYSTEMS

  • Ready to use coating providing suction control and a sound adhesive layer for lime renders
  • Controls suction on high absorption, low porosity substrates
  • Provides good adhesion between the substrate and the finishing render
12Kg Tub Storage: 24 Months Ready to use
View Product

FINICHAUX

Lightweight Lime Rich Fine Or Medium Grain Single Coat Render

  • Micro - fibred, weatherproof, breathable and decorative through colour, one coat, lime rich render for external & internal masonry walls
  • Ideally suited for fine scraped and floated render finishes. Other finishes can be achieved: sponged, roughcast
  • Suitable for spray or hand application
25 Bag Storage: 18 Months

Fire Resistant (see datasheet)

View Product
avn mesh
AVN MESH

Reinforcement for PRB EWI and Render Board Systems

  • Glass reinforcement mesh
  • General external facade use
  • Specifically designed for PRB EWI and render board systems
Storage: Store upright

Fire Resistant (see datasheet)

BBA Approved

View Product

CLASSIC TAL

SEMI-DENSE FINE GRAIN SINGLE COAT / BASECOAT RENDER

  • Weatherproof and breathable smooth, fine finish, weatherproofing render
  • Suitable for dense aggregate concrete blockwork & hard strong brickwork
  • Compatible with organic coverings (paint and thick paint coverings), hydraulic and mineral decorative renders
25Kg Bag Storage: 18 months.

Fire Resistant (see datasheet)

View Product
PRB LATEX FACADE 20L
LATEX FAÇADE

ADMIXTURE FOR BONDING AND ENHANCING MORTARS, RENDERS AND MICRO CONCRETES

  • Used to obtain high performance mortars
  • Improves the workability and adhesion of all mortars
  • Improves weatherproofing and reduces the risk of cracking
20L Tub Storage: 12 months Ready to use
View Product

ACCROFIX PÂTE

READY TO USE SUCTION CONTROL AND BONDING AGENT

  • READY TO USE COLOURED TEXTURED COATING PROVIDING A SOUND ADHESIVE LAYER FOR DECORATIVE RENDERS
  • Controls suction on high absorption, low porosity substrates
  • Provides adhesion between the substrate and the finishing render
20Kg Tub Storage: 24 months Ready to use
View Product
Renomur top Renovation Base Coat
RÉNOMUR TOP

SPECIALIST RENOVATION BASECOAT RENDER FOR PAINTED OR THIN COATED SUBSTRATES

  • Ideal for sound, well adhered painted surfaces without the need for stripping and unpainted masonry and render surfaces
  • Can receive a wide range of mineral and organic finishes
  • Avoids the use of harmful and polluting solvents and saves time
25Kg Bag Storage: 12 month
View Product

RENOMUR PATE

READY TO USE RENOVATION BASECOAT IDEALLY SUITED FOR PAINTED SUBSTRATES

  • Specified for use on external wall insulation systems and render boards
  • For use on paint/thick paint coating refurbishment without stripping
  • Avoids the use of harmful and polluting solvents
20 Tub Storage: 18 months Ready to use
View Product

FONDISOL PE

READY TO USE THIN BASECOAT RENDER FOR EWI & RENDER BOARD SYSTEMS

  • Ready to use basecoat
  • For use on sound substrates
  • Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub Storage: 12 months Ready to use
View Product

FONDISOL F

THIN BASECOAT RENDER AND BONDING MORTAR FOR EWI AND RENDER BOARD SYSTEMS

  • Fibre reinforced basecoat suitable for render board systems, EWI systems and ICF constructions
  • Easy to use both manually or with a spray render machine
  • Available in colours White or Grey
25Kg Bag Storage: 12 months

Fire Resistant (see datasheet)

BBA Approved

View Product

MORTIER PAYSAGER

MICRO MORTAR FOR THE CREATION OF DECORATIVE ARCHITECTURAL PROFILES AND FEATURES

  • Creation of decorative structural elements such as imitation rocks, wall features, modelling, landscapes, various profile shapes
  • Restoration and repair of natural stone
  • Can be applied in thick layers up to 150 mm
25 Bag Storage: 12 months
View Product

Material calculations on the go.

Calculate the exact materials you need to get the job done. Wherever you are.

Material Calculator

Accreditations