Description 

PRB SE ALLEGE is a lightweight, fine grained weatherproof and breathable base coat render which due to its composition can buffers stress between the substrate and the finish. Available in colour grey only, this product is particularly suited for healthy and strong old buildings and is particularly suited for dealing with situations where deep dubbing out is required.

PRB SE ALLEGE can be used on exterior or interior walls on all types of new or renovation housing or commercial buildings.

SUITABLE SUBSTRATES

A range of concrete blocks:

• 3.6 – 7.3N/mm² ultra-lightweight aggregate concrete blocks with a dry density of <950kg/m³.
• 3.6 – 7.3N/mm² ilghtweight aggregate concrete blocks with a dry density of 950 – 1500kg/m³.
• 7.5N/mm² dense aggregate concrete blocks with a dry density of 1500kg/m³.
• Concrete*.
• Brickwork*.
• Clay insulating blocks*.
• Existing sound renders*.
• Stone**
• Lightweight aircrete concrete blockwork of a density > 550 kg/m³.

*It is recommended these substrates receive a suction control coat of PRB ACCROFIX PATE to provide an even substrate. If unsure please contact us.

**It is recommended these substrates receive a suction control coat of PRB PRIMCHAUX PE to provide an even substrate. If unsure please contact us.

Applied in one layer (spray machine) or two layers (spray machine or hand) enhanced with embedded PRB ORANGE MESH or PRB AVE MESH.

It is suitable as a basecoat for the PRB SUPERBRUT, PRB OZÉ, PRB ALG, ALG SUPER BLANC, PRB BELLE ÉPOQUE FINITION mineral renders or for creating a sponge floated smooth and fine finish ready to receive an organic thin coat render* PRB CRÉPISIX, PRB CRÉPOXANE, PRB RÉVOMUR or mineral thin coat PRB CRPIXATE, paint finish PRB COLOR ACRYL, PRB COLOR SILOCRYL, PRB COLOR SILOXANE, PRB COLOR MINERAL PLUS

*Use with the PRB CREPIFOND F or G primer.

For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.