01242 524228
THERMOLOOK GF-GM
THERMOLOOK GF-GM
LIGHTWEIGHT MINERAL TOPCOAT RENDER FOR USE ON EXTERNAL WALL INSULATION AND RENDER BOARD SYSTEMS
- Mineral topcoat render for PRB EWI systems: Thermolook GF/GM EPS, Thermoroche (Mineral Wool) and Thermobois (Wood Fibre)
- Finishes - Fine scraped (GF) Medium Scraped (GM), Roughcast and Spray Textured
- Finished appearance is similar to Monocouche
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
Product Datasheet
Where to Buy
Hand Application
Spray Application
Through Coloured
Insulation
Description
PRB THERMOLOOK is a through coloured thick coat render for use on interior or exterior walls and external wall insulation and render board systems on new builds or refurbishments.
PRB THERMOLOOK is available in a wide range of colours and can be finished in a range of textured including scraped, roughcast and spray textured.
It is applied over a base coat of PRB AVN MESH reinforced PRB FONDISOL F when part of a PRB certified EWI system. Or directly to masonry when there is a combination of differing substrates.
It is also suitable for applying over a range of the PRB basecoats, PRB CLASSIC TAL, PRB SC GRIS, PRB SE ALLEGE.
If required the PRB THERMOLOOK has the capability of creating a pattern and/or imitation stones with the THERMOLOOK GF.
For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.
Please note: Darker colours with a solar absorption coefficient greater than 0.7 must not be used with EWI insulation systems. These include colours Auvergne, Belfast, Caucase, Cuba, Étretat, Vancouver.
Other PRB Products
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
RÉVOMUR M
READY TO USE ECO DESIGNED FIREPROOFED TEXTURED THIN COATING WITH EXCELLENT W3 CLASSIFICATION HYDROPHOBIC CAPABILITY AVAILABLE IN A RANGE OF COLOURS
- Eco-Friendly ready to use top coat decorative textured finish manufactured with 35% recycled materials
- Wide colour range with UK tinting available
- Machine and hand applied
25Kg Tub
Storage: 12 months
Ready to use
FONDIMUR
EASY APPLICATION THIN COAT FIBRED BASECOAT AND ADHESIVE MORTAR
- Fibre reinforced basecoat suitable for render board substrates, EPS EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Levelling and bonding of insulation boards on to the substrate
25Kg Bag
Storage: 12 months
CRÉPISIX M
READY TO USE SILOXANE ENHANCED THIN COAT RENDER IN A 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Thin, fireproofed coating with siloxane additive
- Matt water repellent effect
- Facade protection and decoration
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
CRÉPOXANE F or M
READY TO USE SILOXANE RESIN THIN COAT RENDER IN A 1mm AND 1.5mm GRAIN AVAILABLE IN A RANGE OF COLOURS
- Organic fireproofed structured render with siloxane resin
- Matt water repellent effect
- Excellent water repellency capability and good permeability to water vapour
25Kg Tub
Storage: 24 months
Ready to use
Fire Resistant (see datasheet)
BBA Approved
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
THERMOLOOK GF-GM
LIGHTWEIGHT MINERAL TOPCOAT RENDER FOR USE ON EXTERNAL WALL INSULATION AND RENDER BOARD SYSTEMS
- Mineral topcoat render for PRB EWI systems: Thermolook GF/GM EPS, Thermoroche (Mineral Wool) and Thermobois (Wood Fibre)
- Finishes - Fine scraped (GF) Medium Scraped (GM), Roughcast and Spray Textured
- Finished appearance is similar to Monocouche
25Kg Bag
Storage: 18 months
Fire Resistant (see datasheet)
BBA Approved
EPS 70E
GRAPHITE ENHANCED EPS 70E FOR USE WITH THE PRB EWI SYSTEMS
- Specifically designed for the PRB EWI Systems
- Lambda as low as 0.30 W/mK
- Manufactured to EN-13163-2012+A2-2016
BBA Approved
FONDISOL PE
READY TO USE THIN BASECOAT RENDER FOR EWI & RENDER BOARD SYSTEMS
- Ready to use basecoat
- For use on sound substrates
- Ideal for use on EPS external wall insulation systems and render boards
20Kg Tub
Storage: 12 months
Ready to use
FONDISOL F
THIN BASECOAT RENDER AND BONDING MORTAR FOR EWI AND RENDER BOARD SYSTEMS
- Fibre reinforced basecoat suitable for render board systems, EWI systems and ICF constructions
- Easy to use both manually or with a spray render machine
- Available in colours White or Grey
25Kg Bag
Storage: 12 months
Fire Resistant (see datasheet)
BBA Approved
CRÉPIFOND F or G
LIQUID PRIMER PAINT DESIGNED FOR THIN COAT TOPCOATS AND HIGH PERFORMANCE PAINT FINISHES
- High opacity primer coat
- Multi-purpose on suitable substrates
- Compatible with all PRB organic finishes
20Kg Tub
Storage: 24 months
Ready to use
BBA Approved
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorAccreditations
