PRB EPS 70 E are 1200 x 600 mm x a range of thickness from 40 mm increasing in increments of 10 mm expanded polystyrene panels with straight edges, cut from (grey) blocks of EPS specifically used for exterior facade insulation with the PRB Thermolook EMI EWI system under ETA 08-082, BBA UKTA 23-7000, BBA UKTA 23-7005 and DTA and AT n° 7/13-1557  and on the PRB Thermolook EMI MOB (Timber frame houses).

FOR EWI (EXTERNAL WALL INSULATION)

On new substrates: If the substrate is suitable (perfectly flat), fully bond with PRB FONDISOL F or FONDIMUR, using a U6 or U9 toothed trowel; otherwise bond using 5 large dabs each receiving 1 fastener in the centre of each dabs. fixed through the insulation panel.

For renovation applications: Apply dabs and fasteneres as detailed above.

On timber frame houses: Fix an appropriate PRB approved render board apply full bed bonding using a U 6 or U9 toothed trowel.

EXTERIOR WALLS

REGARDING APPLICATION REGULATIONS, REFER TO:

The particular ETA or BBA UKTA certification as well as the applicable PRB specification and in particular:

Snow and wind regulations.

The provisions indicated in the (ETA, BBA UKTA and DTA PRB THERMOLOOK EMI and applicable AT PRB THERMOLOOK EMI MOB) as well as their respective specifications.

The ETA or BBA UKTA for anchors used for “flush” or “core” fitting compatible with the substrate(s).