01242 524228
SR ADDITIF
SR ADDITIF
LIQUID DRYING ACCELERATOR FOR PRE-MIXED THIN COAT RENDERS AND PAINTS
- Speeds up setting times of thin coat acrylic and siloxane finishes by forming an early surface film
- Ideal in wet, damp and cold weather
- Ready to use
Product Datasheet
Where to Buy
Breathable
Fast Setting
Light Weight
Durable
Description
PRB SR ADDITIF is a liquid additive designed to speed up drying times and form a surface film in the thin coat finishes PRB RÉVOMUR M, PRB CRÉPISIX M, PRB CRÉPOXANE and paint finishes PRB COLOR ACRYL, PRB COLOR SILOCRYL, PRB COLOR SILOXANE.
See the product data sheet for further information.
IMPORTANT INFORMATION TO TAKE NOTE OF:
After the addition of PRB SR ADDITIF, it is essential to quickly mix the whole product added to, using a paddle mixer at a maximum speed of 300 rpm. Ensure the product is fully mixed before using.
The accelerator dosage must be constant throughout the application in order to obtain a regular and consistent colour.
Use at high doses can cause risks of efflorescences and increases shrinkage.
The use of accelerators tends to darken colours.
For application guidance and additional technical information, please refer to the technical data sheet or contact our Technical team directly.
Other PRB Products
RENDER TAPES
A RANGE OF LOW TACK, BRICK AND RENDER AND ROUGH SURFACE PROTECTIVE TAPES
- Low tack tape - Suitable for applications onto smooth surfaces, e.g. window and door frames, metalwork, paint or smooth masonry finishes e.g plaster.
- Brick and render tape - Suitable for applications onto rough surfaces, brick, concrete blocks etc.
- Rough surface tape - Suitable for applications onto rough surfaces, brick, existing render, concrete block, etc.
RENDER BEAD ADHESIVE
WATER BASED FLEXIBLE BONDING ADHESIVE
- High initial grab, designed for use with the PRB mineral renders
- Excellent bonding strength, solvent free and virtually odourless
- Can be applied to damp surfaces
290ml Tube
Storage: 12 months in unopened packaging in a cool and dry storage place
Ready to use
ACCÉLÉRATEUR FLASH
LIQUID ADDITIVE TO ACCELERATE THE SETTING OF POWDERED RENDERS, MORTARS AND CONCRETES
- Used to speed up the initial setting time of cement mortars
- Reduces the time before single-coat renders are scratched
- Improves site working times
20L Tub
Storage: 48 months, Store upright
Ready to use
AVR MESH
HEAVY DUTY REINFORCEMENT MESH FOR THE PRB EWI SYSTEMS
- Specifically designed high impact resistance reinforcement mesh for the PRB EWI systems - THERMOLOOK EMI, THERMOROCHE, THERMOPATE, THERMO XL, THERMOBOIS
- Can also be used to provide high impact resistance to general external facades
Fire Resistant (see datasheet)
BBA Approved
MINÉRALISANT FAÇADE
READY TO USE MINERALISER FOR WATERPROOFING, STABILISING AND PROTECTING SURFACES
- Mineralises materials through micro-crystallisation
- Preserves the original appearance of the materials, solvent free and lets the materials breathe
- Water repellent - suitable for all mineral based substrates
20L Tub
Ready to use
ORANGE MESH
REINFORCING MESH FOR USE WITH MONOCOUCHE RENDERS AND MASONRY BASE COAT RENDERS
- Coated glass fibre mesh
- Specially designed for monocouche renders
- Compatible with PRB floor levellers
0 Tube
Storage: Store upright
Ready to use
AVE MESH
MESH FOR PRB RENDERS AND THERMOLOOK GF/GM LIGHTWEIGHT TOPCOAT RENDER
- Coated glass reinforcement mesh
- For use on external facades
- Fabric Mesh
AVN MESH
Reinforcement for PRB EWI and Render Board Systems
- Glass reinforcement mesh
- General external facade use
- Specifically designed for PRB EWI and render board systems
Fire Resistant (see datasheet)
BBA Approved
ACCROSOL AG
ALL PURPOSE ADHESIVE PROMER
- Multi-substrates
- Clean and quick to apply
- Increases adherence
15Kg Tub
Storage: 18 months
Ready to use
ACTI FLASH
FAST ACTION ALGAE, MOULD AND SURFACE TREATMENT
- Ideal for cleaning mould and algae contaminated facades
- Fast action on contaminated substrates
- Returns your facade to it's initial appearance
20L Tub
Storage: 12 months
Ready to use
HYDROFUGE
WATER REPELLENT, HYDROPHOBIC SURFACE TREATMENT
- Non film forming and silicone free water repellent coating
- Enhances weatherproof capability
- Does not alter the appearance of your facade
20L Container
Storage: 12 months
Ready to use
LATEX FAÇADE
ADMIXTURE FOR BONDING AND ENHANCING MORTARS, RENDERS AND MICRO CONCRETES
- Used to obtain high performance mortars
- Improves the workability and adhesion of all mortars
- Improves weatherproofing and reduces the risk of cracking
20L Tub
Storage: 12 months
Ready to use
ACCROFIX PÂTE
READY TO USE SUCTION CONTROL AND BONDING AGENT
- READY TO USE COLOURED TEXTURED COATING PROVIDING A SOUND ADHESIVE LAYER FOR DECORATIVE RENDERS
- Controls suction on high absorption, low porosity substrates
- Provides adhesion between the substrate and the finishing render
20Kg Tub
Storage: 24 months
Ready to use
SR ADDITIF
LIQUID DRYING ACCELERATOR FOR PRE-MIXED THIN COAT RENDERS AND PAINTS
- Speeds up setting times of thin coat acrylic and siloxane finishes by forming an early surface film
- Ideal in wet, damp and cold weather
- Ready to use
Material calculations on the go.
Calculate the exact materials you need to get the job done. Wherever you are.
Material CalculatorAccreditations
